Keystone Jack Solutions

CATEGORY 5E KEYSTONE JACK

Specifications :

Category 5e keystone jack is designed for superior performance that meets or exceeds industry standard TIA/EIA 568-A-5 requirements. The keystone jack will balance signal transmission of insertion loss and cross talk from 1 to 100 MHz. Jacks are available in 9 colors to match housing or allow color coded designation port in compliance with TIA-606 requirements. UL listed.

Features:

  • Contacts are phosphor bronze plated with 50 micro inches hard gold.
  • 110 or 110/KRONE Universal IDC connector provides vertical termination for 22-26 AWG solid wires.
  • Dual T568A & T568B wiring compatible with Category 5 enhanced requirement.
  • Supplied with two plastic strain relief caps for IDC connector.
  • Large selection of colors, provides many options of color coded designation port.
  • Complies with FCC Part 68.
  • Polycarbonate, 94Vo rated.
  • UL, cUL and DELTA EC Listed.



CATEGORY 5E KEYSTONE JACK, HIGH DENSITY

Specifications :

Category 5e keystone jack is designed for superior performance that meets or exceeds industry standard TIA/EIA 568-A-5 requirements. The keystone jack will balance signal transmission of insertion loss and cross talk from 1 to 100 MHz. Jacks are available in 9 colors to match housing or allow color coded designation port in compliance with TIA-606 requirements. UL listed.

Features:

  • Contacts are phosphor bronze plated with 50 micro inches hard gold.
  • 110 or 110/KRONE Universal IDC connector provides vertical termination for 22-26 AWG solid wires.
  • Dual T568A & T568B wiring compatible with Category 5 enhanced requirement.
  • Supplied with two plastic strain relief caps for IDC connector.
  • Large selection of colors, provides many options of color coded designation port.
  • Complies with FCC Part 68.
  • Polycarbonate, 94Vo rated.
  • UL, cUL and DELTA EC Listed.
  • High Density Size for mosf optimized space using



BACK BOX

  • Single Port without Keystone jack Cat 5e
  • Dual Port without Keystone jack Cat 5e
  • Single Port without Keystone jack Cat 6
  • Single Port without Keystone jack Cat 6
  • Dual Port without Keystone jack Cat6 (Also available with Keystone jack)

Features :

  • Secures the box to any surface, drywall, baseboard and even modular furniture.
  • Mounts easily with supplied screws or double-sided adhesive tape.
  • All-in-one ID cap and dust cover design.
  • Built-in ID cap and dust cover for rigid protection.



CAT 6 UNSHIELDED KEYSTONE JACK

SPECIFICATIONS :

  • Category 6 ANSI/EIA/TIA-568-B component specifications
  • Apply UL-94V-O high-impact,fire-retardant PC (Polycarbonate) material.
  • Spring copper contact : 50- " gold-plated pins over l00- " nickel layer.
  • Insertion life cycle : 750 cycles (min.)/ |.D.C. 250 cycles (min.)
  • Plug & iacl< contact force : l00g.
  • Take IDC (Insulation Displacement Connector) 22-26 AWG wires
  • Plug retention force : 30 lb. (min.)
  • Feature staggered plug contacts.
  • FCC Part 68, UL certified.

ELECTRICAL SPECIFICATIONS :

  • Insulation Resistance : 500M.
  • Contact Resistance : 20M.
  • Current rating : 1.5 Amps.
  • DC Resistance : Max. 0.1
  • Dielectric withstand Voltage : 1000V AC RMS @ @ 6OHz/1 min.



10G CATEGORY 6A SHIELDED KEYSTONE JACK

EmCom’s 10G Category 6A STP keystone jack is designed for superior performance and easy assembly. Meets and exceeds TIA/EIA568B2.1 Category 6A and ISO11801 Class EA standard.

Features :

  • Category6A Class E approved by Delta EC
  • UL & cUL listed
  • Contacts are phosphor bronze plated with 50 micro inches hard gold
  • Dual T568A & T568B wiring
  • Easy Termination cap for quick installation
  • Complies with FCC Part 68
  • Polycarbonate, 94V0 rated